(866) 545-4440 [email protected] New York City · OATH Hearings · November 2026
BUILDING VIOLATION™A service of Building Violation LLC · Code Compliance
November 2026 NYC DOB / ECB / OATH public-record review

1701-1705 Linden Boulevard, Brooklyn, NY 11212 — November 2026 NYC OATH Hearing & Violation Information

The resolved public-record dataset associates 2 DOB/ECB OATH summonses with 1701-1705 Linden Boulevard, Brooklyn, NY 11212. The source records identify electrical work without a permit, dob/oath code-compliance issue and a hearing date of November 25, 2026. The sections below keep the source allegations separate from explanatory analysis so an owner, buyer, realtor, attorney, lender, property manager or contractor can see what the record says, what still needs verification, and what a practical next review could involve.

Electrical work without a permitDOB/OATH code-compliance issue

Property and hearing summary

Actual property address
1701-1705 Linden Boulevard, Brooklyn, NY 11212
Borough
Brooklyn
BIN
3403171
BBL
3038640052 (3/3864/52)
Hearing month
November 2026
Violations on this page
2
Verified hearing date(s) in source extract
November 25, 2026
Source extract
September 18, 2026
Source information: This page was compiled from NYC DOB/ECB/OATH public-record information contained in the November 2026 resolved-property dataset and the associated DOB/ECB source extract dated September 18, 2026. Agency records may change after the source data was obtained. Hearing dates, status, penalties, correction status and agency records should be verified with NYC OATH and DOB before relying on this page.

November 2026 hearing summary

ECB/OATH summonsHearing date / timeSeverityRecord category
39204027H
Normalized: 039204027H		 November 25, 2026
8:30 AM		 CLASS - 2 Electrical work without a permit
39204028J
Normalized: 039204028J		 November 25, 2026
9:30 AM		 CLASS - 1 DOB/OATH code-compliance issue

How the summonses fit together at this property

This property has 2 separate summonses. Some can be coordinated as one property matter for research, correction planning and document gathering, but each summons remains tied to its own allegation and hearing information. Several descriptions point to the same area (roof), which is a sign the summonses may be factually connected. The practical goal is to avoid solving only one piece of the property record while another summons or correction requirement remains open.

Violation-by-violation record and analysis

Each section first identifies what comes directly from the source extract, then separates general explanatory and strategic considerations that may require current-record research or professional review.

Violation 1

Summons 39204027H — Electrical work without a permit

Normalized lookup key: 039204027H
OATH hearingNovember 25, 20268:30 AM
Source-record facts

What DOB alleges

DOB alleges that electrical wiring or equipment was installed without the required electrical permit or approval. The inspector's description specifically references roof and electrical wiring/equipment.

Specific record details: roof, electrical wiring/equipment.

Full violation description from the source extract

ELECTRICAL WORK WITHOUT A PERMIT. OBSERVED ON THE ROOF THE NEW INSTALLATION OF CENTRAL A/C UNIT WITH NEW ALUMINUM PIPES AND WIRES ALSO THE UNIT IS WIRED USING SOLID PIPING. NEC 350 USE OF SEAL TIGHT, CHECKED BI

Issue date
September 14, 2026
Served date
September 14, 2026
Source violation type
Unknown
Severity
CLASS - 2
Hearing status in source extract
PENDING
Infraction / law references in source extract:
  • 2C4 — 27-3018(B) ELECTRICAL WORK WITHOUT A PERMIT
General explanation / matters to verify

Record-specific focus: Before choosing a correction or hearing strategy, verify the source allegation concerning electrical work without a permit. observed on the roof the new installation of central a/c unit with new aluminum pipes and wires also the unit is wired using solid piping. nec 350 use of seal tight, checked bi.

What this violation means

DOB is alleging that electrical work was installed without the required approval or permit. Electrical summonses often turn on both the physical wiring/equipment observed and whether a valid electrical filing or permit covered that scope.

What may be required to correct the condition

The permit history and current electrical condition should be checked first. If the wiring is to remain, a New York City licensed electrician may need to evaluate the work, obtain the appropriate electrical filing/permit where available, make any required corrections, and complete inspection or sign-off steps. If the work cannot remain, restoration/removal may be the alternative.

What the OATH hearing may involve

At OATH, evidence may include the electrical permit history, photographs showing the condition at the cited location, the scope of any existing permit, invoices or contractor records, and proof of correction if work was later legalized or removed.

Possible defenses or factual issues worth investigating

Confirm whether the cited wiring/equipment was actually new work, whether it fell within an existing electrical filing, whether the location and scope in the summons match the site, and whether subsequent permitted correction changes the evidentiary picture.

Documents and evidence that may be useful

  • electrical permits/filings and inspection records
  • photographs of the cited wiring or equipment
  • licensed-electrician invoices or reports
  • approved construction plans if the electrical scope is part of a larger alteration
  • proof of correction and any Certificate of Correction submission
Violation 2

Summons 39204028J — DOB/OATH code-compliance issue

Normalized lookup key: 039204028J
OATH hearingNovember 25, 20269:30 AM
Source-record facts

What DOB alleges

DOB alleges a dob/oath code-compliance issue condition. The inspector's description specifically references roof and electrical wiring/equipment.

Specific record details: roof, electrical wiring/equipment.

Full violation description from the source extract

MISCELLANEOUS VIOLATION OF THE ELECTRICAL CODE TECHNICAL STANDARDS. OBSERVED ON THE ROOF THE STAND BY GENERATOR IS NOT IN A STATE OF READINESS FOR EMERGENCY USE. ALL EMEREGENCY SYESTEM MUST BE READY FOR USE. NE

Issue date
September 14, 2026
Served date
September 14, 2026
Source violation type
Unknown
Severity
CLASS - 1
Hearing status in source extract
PENDING
Infraction / law references in source extract:
  • 1D1 — EC-MISC MICELLANEOUS VIOLATION OF ELECTRICAL CODE TECHNICAL STANDARDS
General explanation / matters to verify

Record-specific focus: Before choosing a correction or hearing strategy, verify the source allegation concerning miscellaneous violation of the electrical code technical standards. observed on the roof the stand by generator is not in a state of readiness for emergency use. all emeregency syestem must be ready for use. ne.

What this violation means

This summons is a DOB/OATH code-compliance matter. The source description—not the category label alone—should control the factual review, because similarly classified summonses can involve very different physical conditions.

What may be required to correct the condition

Start by verifying the cited condition against the current site and DOB record, then identify the qualified contractor, licensed trade or registered design professional—if any—needed for correction, permits, inspection or closeout. Because electrical work is mentioned, any correction plan should separately verify whether licensed electrical work, filing or inspection is required.

What the OATH hearing may involve

Hearing preparation should focus on the facts alleged, the condition on the inspection date, permit/approval history, responsibility for the cited area, and any reliable evidence of correction or contrary facts.

Possible defenses or factual issues worth investigating

Review the exact allegation, cited code section, location, permit/approval history and any later agency activity. Avoid assuming a defense or correction path before the current record is checked.

Documents and evidence that may be useful

  • the summons and current OATH status
  • dated photographs
  • relevant DOB permits/plans/violations
  • contracts, invoices or professional reports tied to the cited condition
  • proof of correction where available
Property-specific resolution support

How Building Violation LLC may help at 1701-1705 Linden Boulevard, Brooklyn, NY 11212

For 1701-1705 Linden Boulevard, Brooklyn, NY 11212, the current source extract points to electrical work without a permit, dob/oath code-compliance issue. Because this property has multiple summonses, the practical advantage is coordinating record research, hearing preparation and correction work as one property matter while still tracking each summons separately. Building Violation LLC can scope the relevant record research, OATH hearing preparation/representation, permit or legal-use review, licensed-trade or registered-professional coordination, correction documentation and Certificate of Correction/closeout work where those steps actually apply. Detailed technical research and project work begin only after the applicable scope, authorization and payment are established.

Work-without-permit resolution Violation and property-record research OATH / ECB hearing preparation and representation
Start Property Review Call (866) 545-4440 [email protected]
Official government starting points

Verify the current OATH / DOB record

The source extract is a point-in-time record. Hearing dates, hearing status, penalties, correction status, permits and later agency filings can change. Use the official NYC systems below before making a decision or appearing at a hearing.

General information / not legal advice: The explanatory and procedural information on this page is general information and does not constitute legal advice. Property-specific defenses, filing requirements and correction strategies should be verified based on the current agency record and the circumstances of the matter.

Browse all resolved November 2026 property hearing pages